Mitsubishi Outlander: Heater, Air Conditioning and Ventilation
Mitsubishi Outlander 2007-2013 Service Manual / Chassis Electrical, Heater, Air Conditioning / Heater, Air Conditioning and Ventilation
- General Information, Specifications
- Manual A/C Diagnosis
- On-vehicle Service
- Heater Unit, Heater Core, Blower Assembly and Evaporator Unit
- Compressor Assembly
READ NEXT:
General Information, Specifications
General Information
The blower, heater, and evaporator have been integrated
with the heater and A/C system to achieve
greater fan power and noise reduction.
SAFETY PRECAUTIONS
WARNING
Wear safety gog
Manual A/C Diagnosis
INTRODUCTION TO HEATER, AIR CONDITIONING AND VENTILATION DIAGNOSIS
Air is drawn into the heater assembly from either the
outside, or from the inside of the passenger cabin if
DEFROST, maximum cooling
DTC B1000, B1003, B1018, B1021, B1031, B1032, B1034, B1035, B1079,
B2214, B223B
DTC B1000: Control Panel Communication Error
DTC SET CONDITION
DTC B1000 will be set when the communication
between A/C-ECU and A/C control panel cannot be
performed.
TECHNICAL DESCRIPTION (COMMENT)
SEE MORE:
Seat Assembly
FRONT SEAT ASSEMBLY
REMOVAL AND INSTALLATION
CAUTION
To remove the front seat assembly of vehicle with side air bag, refer to
GROUP 52B - Service Precautions and Curtain Air Bag Module.
Removal steps
Headrest
Front seat anchor cover
Rear seat anchor cover
Wiring harness connectors
Front
Warning lamps
Brake warning lamp
This lamp will illuminate for a few seconds when the ignition switch is turned
to the “ON” position. A warning is also displayed on the multi-information display.
With the ignition switch “ON”, the brake warning lamp illuminates under the following
conditions:
χ
© 2010-2026 Copyright www.mioutlander.com
